SEE THE BUY IT NOW PAGE FOR LATEST PRICES - Company Message



fitting instructions for pitched canopy

1.2 people needed
2.pre drill grey flange with 6mm drill holes to be 8-10 " apart (make sure you have 1 in each end
3.hold canopy in position and mark wall through the 2 end holes
4 drill and plug wall (raw/wall plugs)to suit 2-3" screws and fix canopy up by the 2 end s only then you can mark the rest of holes to be drilled
5 take canopy down and drill and plug rest of holes and then canopy can be fixed permanently
6.if needed a fixing can go through the bracket base (4" screws for this ) we rarely fit using these as once fitted across flange it should be a solid fixing
7 seal flange with sealent and if you wish you can complete job by fixing lead flashband to cover flange and screw ( any good diy store will stock)
8.clean with polish or wd40



Website Builder provided by  Vistaprint